Uncommitted Backplane
 | Uncommitted BackplaneTotal flexibility on positioning of Vcc or 0V Four voltage rails available M3 stud or 6,3mm Faston power connection facilities Choice of backplane widths and pitches High quality PTH boards with resist coating to prevent solder bridging This range of backplanes has been designed to be totally flexible, allowing the engineer to configure the backplane to exactly match the requirements of his system. Each pin is bussed across the board, with the added facility of using row b as 0V guard rails thus minimising crosstalk on rows a and c. Power connection to the backplane is by means of M3 studs or 6,3mm Faston tabs. To identify voltages a combination of studs and Fastons may be used. Power committment to pins 1, 2, 31 and 32, and other pins can be committed by either wirewrapping or hard wiring. Board specification Dielectric Epoxy glass BS4584, EP-GC-Cu3 FR4 Nom. thickness 1,6mm Base copper thickness 35?m FinishPlated copper 25?m average Tin lead 8?m nominal Total 68?m Note: bare boards are UL 94 V-0 recognised components file number E 116551. Bare boards are approved to BS9762. Please allow 4 weeks delivery on this item |